P25 SRM9030/9030
Plus
– OPERATING INSTRUCTIONS
TNM-U-E-0094
Oct 15 (Iss. 2.0)
Page 19
MAIN SCREEN
3
MAIN SCREEN
3.1
L
AYOUT
An example of the main or default screen that is displayed when the radio is switched on is shown
below in
Figure 3.
Figure 3. Main/Default screen (SRM9030
Plus
example).
The screen has three main areas: the Icon Area; the Text Panel; and the Soft Labels area.
3.1.1
Soft Labels
The right-hand side of the screen is used to display the Soft Labels associated with the function
buttons.
The soft label text is defined in the FPP and can be assigned to the F1 to F4 function buttons.
Each soft label can be up to five characters.
3.1.2
Text Panel
The main area of the default screen is the Text Panel, which displays textual information. This
information contains both Persistent and Non-persistent text information as follows:
Persistent Text, e.g. Channel name, Zone name.
o
The
Channel Name
shows the text associated with the currently selected radio
channel.
o
The
Zone Name
shows the text associated with the currently selected radio zone.
Non-persistent Text messages, e.g. keypad dial string entries, received status/data
messages, error messages, etc.
3.1.3
Icons
The lower part of the display is reserved for Standard and Special Icons.
There are only six positions for icons to be displayed (see
Figure 4
overleaf), however, the number
of icons that can be displayed exceed this. Therefore, some icons will share the same location
(see
Table 2
overleaf).
The
RSSI Bars
is a special Icon and it is displayed on the left of the default screen when a signal
is being received. They indicate the signal strength of the current channel. The stronger the Rx
signal, the more bars will be displayed.
F1
F2
F3
F4
Menu
Channel
Name
Icon Area
Zone
Name
RSSI
Bars
Y