P25 SRM9030/9030
Plus
– OPERATING INSTRUCTIONS
TNM-U-E-0094
Oct 15 (Iss. 2.0)
Page 18
CONTROLS
The functions of each of the controls are detailed in below
Table 1
.
Table 1. SRM9030
– Control Functions.
SRM9030 Key
Label
(9030/9030Plus)
Function
Power On/Off
To turn the radio on, press and hold the volume knob for
about 1 second. To turn the radio off, press and hold the
volume knob until the long tone sounds.
PTT
Push-To-Talk. Hold the microphone about 10 cm from the
mouth. Press and hold the PTT switch and speak.
Release to listen.
Volume
Turn the volume knob clockwise to increase volume and
anti-clockwise to reduce volume.
Function Key F1
Programmable Function key.
Default
– Menu Select.
Function Key F2
Programmable Function key.
Default
– Channel Down.
Function Key F3
Programmable Function key.
Default
– Channel Up.
Function Key F4
Programmable Function key.
Default
– OK.
Function Key F5
Programmable Function key.
Default
– Emergency Alarm.
Function Key F6
Programmable Function key. Located on Microphone.
Function Key F7
Programmable Function key.
Default
– Call.
Function Key F8
Programmable Function key.
Default
– Reset/Cancel.
Function Key F9
Programmable Function key.
Function Key F10
Programmable Function key.
Function Key F11
Programmable Function key.
Function Key F12
Programmable Function key.
Keypad
1
2
3
Keypad can be used to select a Channel or Special
Function.
E.g. 12# will select channel 12.
4
5
6
7
8
9
*
0
#
Indicator LED
Function
A Green LED when receiving a signal.
A Red LED when the radio is transmitting.