Simex SRP-73-XC, User Manual

Page: 45 / 48

User manual - METER SRP-73-XC
11. DEFAULT AND USER'S SETTINGS LIST
Parameter Description Default value User's value
Desc.
page
Parameters of relay R1 operation (“rEL1” menu)
SEtP Relay R1 threshold 20.0 22
SEt2 Relay R1 second threshold 40.0 22
HYSt Hysteresis of relay R1 0.0 22
modE Operation mode of relay R1 on 22
t on Turn on delay of relay R1 0.0 23
toFF Turn off delay of relay R1 0.0 23
unit
Unit of “t on” , “toFF” parameters of relay R1
SEC 23
AL Reaction for critical situation of relay R1 oFF 23
Parameters of relay R2 operation (“rEL2” menu)
SEtP Relay R2 threshold 40.0 22
SEt2 Relay R2 second threshold 60.0 22
HYSt Hysteresis of relay R2 0.0 22
modE Operation mode of relay R2 on 22
t on Turn on delay of relay R2 0.0 23
toFF Turn off delay of relay R2 0.0 23
unit Unit of “t on” , “toFF” parameters of relay R2 SEC 23
AL Reaction for critical situation of relay R2 oFF 23
Configuration of measurement input (“inPt” menu)
tYPE Input mode „60” 24
CHAr Conversion characteristic mode Lin 24
FiLt Filtering ratio 0 24
Pnt Decimal point position 0.0 24
Lo C Minimum displayed value (for nominal range) 000.0 24
Hi C Maximum displayed value (for nominal range) 100.0 24
Hi r Extension of the top of the nominal input range 5.0 (%) 25
Display parameters
bri Display brightness bri6 26
Signalization via colour of the display (“CoL” menu )
SCoL Basic colour of the display grEE 26
C r1 Change display colour after R1 is activated oFF 26
C r2 Change display colour after R2 is activated oFF 26
45