User manual - DATA RECORDER SRD-99 and cooperating software
”Date”,”Time”
- these options are available when the "
List type
" parameter was set as
"
historic
" and define the position of the horizontal line (located in the lower
part of the display) in relation to the recorded measurements results
displayed on the list. Above the horizontal line the display shows the results
of the measurement recorded before the time defined by "
Date
" and "
Time
"
parameters. Below the horizontal line display shows the result of the
measurement at the time (or directly after it) defined by "
Date
" and "
Time
"
parameters. The default values "
Date
" and "
Time
" parameters are the time
and date when the unit was switched on last.
7.2.2.
”Graph options” menu
This menu contains options configuring the method of displaying measurement results for
the "
Graph
" mode:
”Scale”
- this option allows time points corresponding to particular points on the horizontal
axis of the graph (time axis) to be defined. 16 options are available:
from
0.125
seconds/point
to
1 hour/point
.
Fig. 7.11. “
Graph options
” menu
7.2.3.
”Channels list options” menu
This menu contains options configuring the method of displaying measurement results for
the "
Channels list
" mode:
”Display”
- this option enables the selection of the method of displaying measurement
results. The following possibilities are available:
”values”
- measurement results displayed in numeric form
”bar graphs”
- measurement results displayed in the form of bars (percentage)
Fig. 7.12.
"Channels list options"
menu
43
