User manual - DATA RECORDER SRD-99 and cooperating software
Fig. 6.14. Unit in
“Measurements list”
measurement results presentation mode.
“List type”
parameter set as
“current”.
If the "
List type
" parameter in the "
Measurements list options
" menu was set as "
historical
"
), the last of the displayed results (displayed under the line) concerns the
measurement recorded at the time (or directly after it) defined by "
Date
" and "
Time
"
parameters in the "
Measurements list options
" menu. Above the line, the display shows
results of previously recorded measurements, i.e. before the time defined by "
Date
" and
"
Time
" parameters in the "
Measurements list options
" menu.
If there are no recorded measurements in the unit's memory, the list of recorded
measurements will be empty. Holding down the
[ENTER]
key and
[^]
or
[v]
key at the same
time allows the measurement list to be scrolled through.
Fig. 6.15. Unit in
“Measurements list”
measurement results presentation mode.
“List type”
parameter set as
“historic”.
When scrolling through the measurement list the "
List type
", "
Date
" and "
Time
" parameters in
the "
Measurements list options
" are set automatically depending on the time and date of the
currently displayed measurement results. The method of displaying shall be automatically
adjusted to the new values of these parameters.
If the setting of "
Date
" and "
Time
" parameters in the "
Measurements list options
"
menu shall be later than the current date and time defined by "
Date
" and "
Time
"
parameters in "
Date & time settings
" menu (calling parameters recorded "in future")
the display will only show the list of measurement results recorded so far and the
"
Date & time settings
" parameters shall be automatically reset to date and time
values of the latest measurement.
27
i
channel number
recording
date and time
date and time of
current measurement
(not recorded yet)
channel name
unit name
recorded overload
recorded
measurements
current measurement
(displayed in negative mode)
channel number
recording
date and time
measurement registered
at (or after) time point
defined by „
Date
“ and
„
Time
“ parameters
channel name
unit name
recorded overload
measurement registered
before time point
defined by ”
Date
” and
”
Time
” parameters
