User manual - DATA RECORDER SRD-99 and cooperating software
For detailed description of available device configuration methods see
CONFIGURATION MODES
section.
In the central part of the tab (in a separated panel) there are fields for configuring device
parameters. The parameters can be configured in three modes. Detailed description of
individual parameters can be found in the user manual for device.
•
The ”
°
” (degree) sign can be entered by pressing the ”
~
”
key on the keyboard.
•
The content of the list, depends on the type of device being configured.
3.2.
“OUTPUTS SETTINGS”
TAB
This tab contains options for configuring device outputs. Detailed description of individual
parameters can be found in the user manual for device.
Fig. 3.3.
Outputs settings
tab options
3.3.
“LOGGING SETUP” TAB
The tab contains three sections:
•
Recording
- in this section check the fields corresponding to active channels,
which are to be recorded. If the selected channel is to be inactive
the command to record from this channel will have no effect;
•
Averaging
- in this section check the fields corresponding to active channels
of the device, for which averaged data are to be recorded instead of
momentary data.
105
i
