Sime BRAVA SLIM 40 BF, Installation And Maintenance Manual, Page: 90 / 136

90
EN
3.5 Display of operating data and counters
Once the boiler is operating a qualified technician can view the
operating data and the counters as follows:.
From the operating screen in the mode enabled at that moment
(WINTER n or SUMMER l ):
– go into "DISPLAY" by pressing the buttons r and < at the
same time
for more than 3 seconds until the following screen
appears
From this point, the technician has 2 options:
– scroll through the list of
"information (PAR)"
and
"counters
(PARc)" by pressing the button t . Scrolling will be in sequence
– display the “activated alarms” (no more than 10) by pressing
the button r
– Once in this section, proceed with button t or r .
When all the values have been displayed, exit the menu by
pressing and holding down the button y for approximately 5
seconds until the initial screen is displayed.
TABLE OF INFORMATION DISPLAYED
Type No. Description Range U/M Step
PAR 00 SW version
PAR 01 External sensor - 9 .. 99 °C 1
PAR 02 Delivery sensor 1
temperature
- 9 .. 99 °C 1
PAR 03 Delivery sensor 2
temperature
- 9 .. 99 °C 1
PAR 04 Domestic hot water
sensor temperature
- 9 .. 99 °C 1
PAR 05 AUX auxiliary sensor - 9 .. 99 °C 1
PAR 06 Actual heating SET
temperature
Par. 13 …
Par. 14
°C 1
PAR 07 Power level 0 .. 99 % 1
PAR 08 Flow meter rate 0 .. 99 l/min 0.1
PAR 09
Water pressure
transducer reading (if
resent)
0…99 bar 0.1
TABLE OF COUNTER DISPLAYED
Type No. Description Range U/M Step
PAR c0 total no. of boiler
operating hours
0 .. 99 h x 1000
0.1; from
0.0 to 9.9;
1; from
10 to 99
PAR c1 total no. of burner
operating hours
0 .. 99 h x 1000
0.1; from
0.0 to 9.9;
1; from
10 to 99
PAR c2 total no. of burner
ignitions
0 .. 99 h x 1000
0.1; from
0.0 to 9.9;
1; from
10 to 99
PAR c3 total no. faults 0 .. 99 x 1 1
PAR c4 total no. of times PAR
parameters accessed
0 .. 99 x 1 1
PAR c5
total no. of times
OEM parameters
accessed
0 .. 99 x 1 1
PAR c6
time unitl next
maintenance
intervention
0 .. 99 months 1
PAR c7 total no. of
calibrations
1 .. 199 x 1 1
TABLE OF ACTIVATED ALARMS/FAULTS
Type No. Description
PAR A0 Last activated alarm/fault
PAR A1 Last but one activated alarm/fault
PAR A2 Third from last activated alarm/fault
PAR A3 Previous activated alarm/fault
PAR A4 Previous activated alarm/fault
PAR A5 Previous activated alarm/fault
PAR A6 Previous activated alarm/fault
PAR A7 Previous activated alarm/fault
PAR A8 Previous activated alarm/fault
PAR A9 Previous activated alarm/fault