SIMARINE SCQ25T, User Manual

Page: 13 / 19

E
N
4
.
In
st
al
la
ti
o
n
13
** Each connected liquid or temperature sensor needs to be configured and
calibrated. This is done via PICO in an easy way.
The configuration and calibration process is described in Pico’s manual.
*** To activate the alarm contact it is necessary to configure it via PICO in
an easy way. The configuration process is described
in PICO’s manual.
4.4 SCQ25T Connection
Example of a PICO-Splitter-SCQ25T connection with voltage level
sensors/battery banks and resistance level sensors/temperature sensors.