1.866.325.1731 | [email protected] | [email protected]
www.silynxcom.com | 9901 Belward Campus Drive Suite 150 Rockville, MD 20850
*Information subject to change without notice
SEP 2015
KEY FOB PTT
User Guide - Pairing
Key FOB PTT
PTT A
PTT B
PTT B
CLARUS
1. Power on CLARUS (Press and hold (+) for 5 sec).
2. Press PTT B quickly 5 times.
3. A slow beeping tone heard in the headset indicates the
CLARUS is in pairing mode. (As the pairing time runs out the
beeping will speed up)
4. Position the Key Fob PTT close to the CLARUS.
5. Press all three buttons on the Key Fob PTT (“lock”,
“unlock”, and “panic”) at the same time.
6. A short rapid beeping confirmation tone will indicate a
instructions
Note: Pairing must occur within 60 sec after powering on the
CLARUS
