98
turn OFF the respective engine and contact
your Silverton dealer for inspection and
repair, if necessary.
Check the exhaust outlets for the presence
of water. Water coming from the exhaust
outlets indicates proper water circulation in
the engine exhaust system. Water should
start coming out of the exhaust outlet shortly
after the engine is started. If you do not
observe any water coming from the exhaust
outlet(s), turn OFF the respective engine and
contact your Silverton dealer for inspection
and repair, if necessary.
The exhaust system is raw
water cooled. If there is no presence of water
in the exhaust outlet(s), the exhaust system
may overheat, r esulting in serious damage
to the engine(s) and the exhaust system com-
ponents.
After both engines have reached their normal
operating temperature, increase the RPM’ s
to 2000 and check both voltmeters to be
certain they read between 13 and 14.5 volts.
The engine voltmeters are located on the
Helm Gauge Panel (See
Console Layout
on Page 142, which illustrates the location
of the voltmeters).
If the voltmeter(s) read above
15 volts, turn OFF the respective engine(s) as
damage to the alternator(s) may result.
Visually inspect the engine compartment
for fuel, oil and water leaks. If leaks are
observed, attempt to locate the source and
contact your Silverton dealer for inspection
and repair, if necessary.
•
•
•
Visually inspect the exhaust system for
leaks. If any leak is observed, immedi-
ately turn OFF the engines and contact your
Silverton dealer for inspection and repair, if
necessary.
Check the transmission
fl
uid level. The
engines should be running at idle speed
and at normal operating temperature. The
transmission
fl
uid should read FULL on the
“dipstick”. If the
fl
uid level is low, add suf-
fi
cient transmission
fl
uid to raise the level to
the FULL mark or slightly lower. DO NOT
over
fi
ll. If the
fl
uid level is low, check the
transmission(s) for leaks and contact your
Silverton dealer for repairs if leaks are
noted.
REFER TO THE ENGINE MANUAL IN-
CLUDED WITH YOUR OWNER’S PACKET
FOR ADDITIONAL TECHNICAL INFOR-
MATION CONCERNING MAINTENANCE
REQUIREMENTS FOR THE SPECIFIC EN-
GINES WITH WHICH YOUR
330 SPORT
BRIDGE
IS EQUIPPED.
•
•
Summary of Contents for 330 Sport Bridge
