Product Model No. SST-ES02-USB
Product Description : 2.4GHz wireless computer power and reset remote switch
Package Content
1 x ES02 adapter
1 x 250mm cable
1 x Remote
To install ES02 properly, please follow the steps listed below:
￭
Turn off your computer and unplug the power cord and all cables
￭
Remove your computer’s case cover
￭
Unplug the power cable and reset cable from motherboard
Installation Guide
STEP 1
Carefully install ES02 into the USB 9 pin connector on the motherboard (Figure 1.1), then
connect the “POWER SW” and “RESET SW” to the corresponding pin headers on the
motherboard. (Figure 1.2)
Figure 1.1
USB 9 pin Connector
Figure 1.2
Power / Rest pin photo