32
SSK 300 A1
GB
WARNING!
THERE IS A RISK OF INJURY!
►
Overfi lling the blender jug can lead to hot
liquid splashing out during food preparation!
Risk of scalding! Always pay attention to the
markings on the blender jug!
►
Always remove the lid carefully, opening it
facing away from you so that steam can
escape towards the rear. Do not lean over
the appliance while it is boiling. Use a dish
cloth or oven gloves when touching the lid
and the blender jug.
Caution! Hot surface!
ATTENTION! RISK OF FIRE!
►
Do not operate the appliance in the vicinity
of or under curtains, wall-mounted cupboards
or other fl ammable materials.
►
Place the appliance on a heat-resistant surface
(not on varnished tables or tablecloths). Do not
operate it close to other heat sources (cooker,
gas fl ame). Otherwise there is a danger of
damage to the appliance and/or furniture.
►
Place the appliance on a level and stable
surface. Ensure that it is set up at a suffi cient
distance to walls and cupboards. This will
ensure that you avoid damage caused by
rising steam.
►
Never operate the appliance via an external
time-switch or a separate remote control system.
ATTENTION! DAMAGE TO PROPERTY!
►
Never operate the appliance when it is empty,
in other words, without any ingredients in the
blender attachment.
Before fi rst use
■
Remove all packaging materials from the appli-
ance.
■
Clean the appliance as described in the section
"Cleaning and Care".
■
Ensure that all parts are completely dry before
operating the appliance.
Assembling the appliance
NOTE
►
The appliance cannot be switched on until all
parts are correctly assembled.
1) Place the measuring cup
1
in the lid
2
so
that the two plastic tabs on the measuring
cup
1
fi t into the notches on the lid
2
.
2) Turn the measuring cup
1
clockwise a little
way so that it sits tightly.
3) If required, place the puree fi lter
9
centrally
above the blade
4
.
4) Place the lid
2
slightly off set on the blender
jug
3
(the arrow on the handle points to the
opened lock
). Now turn it until the catches
on the lid
2
engage in the grooves on the blend-
er jug
3
and click fi rmly into place (the arrow on
the handle points to the closed lock
).The lid
2
also fi xes the puree fi lter
9
into place.
5) Place the blender jug
3
on the motor block
5
so that the contacts on the blender jug
3
con-
nect with the sockets on the motor block
5
(when the mains plug is connected, the cor-
rect placement of the blender jug
3
will be
confi rmed by a signal tone).
NOTE
►
Place the egg insert
7
as far as it will go into
the blender jug
3
until it is fi rmly in place. The
handle of the egg insert
7
will be pointing
upwards.
IB_91022_SSK300A1_LB2.indb 32
IB_91022_SSK300A1_LB2.indb 32
31.07.14 16:33
31.07.14 16:33
Summary of Contents for SSMS 300 A1
Page 3: ...C A B ...
