SP-205 English
5
To connect the cables to the clamps of the satellite speakers, press
the black or red lever and insert the insulation-free end of the cable
into the opening. Then release the lever. A spring mechanism will fix
the cable in its place. Gently pull the cable to verify that it has been
connected properly to the clamp.
Next connect the subwoofer to the audio device, e.g. the computer’s
sound card (A) (Speaker/Line Out) or any other audio device with
Line-Out connector (B). For this, use the audio cable (see the figure
below).
Figure: Audio cable
Connect the power plug (D) of the subwoofer to a wall outlet.
Figure: Satellite speaker
(back view)
Insert the black cable into
the black clamp (left)
Insert the marked cable
into the red clamp (right)
