Silvercrest SLB 1.2 C2, Operating Instructions Manual

Page: 11 / 84

GB
│
CY
│ 7 ■
SLB 1.2 C2
Handling and use
This section provides you with important information on handling and
using the device .
System requirements
▯ Computer with sound card and USB connection
or
▯ audio device with audio output (3 .5 mm jack plug) and USB
connection (alternatively with external USB power supply) .
Connecting the loudspeaker
♦ Ensure that the rotary switch
4
is in the “OFF” position .
♦ Plug the 3 .5 mm jack plug
8
into the line out or headphone
socket of your audio device (e .g . notebook, MP3 player) .
The audio signals are transmitted via this connection .
♦ Plug the USB plug
9
into a USB socket of your audio device
(alternatively into the USB socket of an external USB power
supply) . The mains adapter should have the following speci-
fications: 5 V
, min . 500 mA . The power supply for the
loudspeaker
6
is provided via this connection .
NOTE
► The loudspeakers
6
do not work without a USB connection!
Switching on/off and adjusting the volume
♦ Turn the rotary switch
4
clockwise until a click is heard in
order to switch the loudspeakers
6
on .
♦ Turn the rotary switch
4
further in a clockwise direction to
increase the volume .
♦ Turn the rotary switch
4
anticlockwise to decrease the volume .
♦ Turn the rotary switch
4
anticlockwise until a click is heard
(OFF position) in order to switch the loudspeakers
6
off .
Switching the light on and off
♦ Turn the LIGHT switch to the “ON” position in order to
switch the loudspeaker
6
light on .
♦ Turn the LIGHT switch to the “OFF” position in order to
switch the loudspeaker
6
light off .