Silvercrest SKG 1700 A2, Operating Instructions Manual

Page: 10 / 100

8
GB
Barbecue (Figure B)
The open position of the grill plates is suita-
ble ...
… for slow grilling of comparatively
thick food,
… for preparing food with different tem-
perature settings simultaneously, and
… for preparing comparatively large
quantities of food.
1. Preheat the grill plates 13 .
2. Fold out the base 3 .
3. Open the lid 4 upwards, lift it up, and
open it further until it is horizontal.
4. Place the other grease drip tray 16 un-
der the oil/fat runoff 14 of the grill
plate 13 in the lid.
5. Place the food to be grilled on both grill
plates 13 .
Grill oven (Figure C)
The oven function is particularly suitable for
the gratinating of food.
1. Preheat the grill plates 13 .
2. Open the lid 4 of the contact grill up-
wards. Be careful not to raise the lid
any further after it is vertical.
3. Place the food to be grilled on the lower
grill plate.
4. Lift the lid 4 up and pull it forwards and
down, until it is parallel to the lower grill
plate
13 .
6.4 Switching off
1. Set both thermostat controls 9 + 15 to
the setting "•".
2. Pull out the mains plug 6 .
3. Lift the grilled food off the grill plate 13
using a suitable kitchen utensil. Use e.g.
a spatula made from wood or heat-re-
sistant plastic, but never from metal.
7. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
• Pull the mains plug 6 out of the wall
socket before you clean the contact grill.
• The device, the power cable and the mains
plug 6 must not be immersed in water or
any other liquids.
DANGER! Risk of injury
through burning!
Allow all the parts to cool down be-
fore cleaning.
WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.
Clean the device after each use and remove
all food residues.
Outer surfaces
• Clean the outer surfaces using a soft,
damp cloth with a mild soap solution.
Grill plates
For purposes of cleaning, remove the grill
plates
13 from the device after it has cooled
down.
1. Press the grip clamps
5
to the side and
remove the grill plates 13 from their
brackets.
2. Clean the grill plates 13 using mild de-
tergent and dry them.
3. Place the grill plates into the device and
press them against the grip clamps 5
until the grill plates click into position.
NOTE: burnt-on food or fat residue is often
easier to remove if you leave a damp wash-
cloth on the baked-on residue overnight to
soften it.
__RP100156_B4.book Seite 8 Dienstag, 10. Juni 2014 7:08 19