10 GB/CY
Cleaning and storage
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children .
Before first use
Remove the packaging . Check if all parts are
complete .
NOTE:
The product may give off some odour
during first use . These are production or transport
residue that will quickly subside .
Operation
Drying hair
(Fig . A)
Connect the power plug 6 to a suitable electrical
outlet .
Select the desired air flow and heat levels:
/ / 7
Air flow
(Switch position)
Product off
Product on: Gentle air flow
Product on: Strong air flow
/ / 8
Heat
(Switch position)
No heat
Low heat
High heat
After use: Select 7 to switch off the product .
Disconnect the power plug 6 from the electrical
outlet .
Ionization mode
(Fig . B)
/ 4
Ionization
LED
1
(Switch position)
Ionization off
Off
Ionization on
On
NOTE:
Remove the concentrator nozzle 11 and
diffuser 12 before using the ionization mode . This
optimises the ionization performance . Use strong
air flow ( 7 ) and high heat level ( 8 ) in
ionization mode to dry hair quickly .
Styling hair
Using the concentrator nozzle
Put the concentrator nozzle 11 on the air outlet
10 .
Rotate the concentrator nozzle 11 to change the
position .
Switch on the product . Use the concentrator
nozzle 11 to direct the air flow onto a specific
section of the hair .
NOTE:
We recommended to use gentle air flow
( 7 ) and low heat level ( 8 ) when styling
hair .
Using the diffuser
Put the diffuser 12 on the air outlet 10 (Fig . C) .
Switch on the product . Use the diffuser 12 to curl
the hair or to create gentle waves .
m
CAUTION!
Do not remove the concentrator
nozzle 11 or the diffuser 12 when these
accessories are still hot .
