■
86
│
GB
│
MT
SDGS 1630 A1
Accessories
NOTE
►
Before using any accessory, carefully read the manufacturer's care instruc-
tions on the label of the piece of clothing you are treating . We also
recommend that you test the accessory on a discreet part of the fabric first .
►
Before attaching an accessory to the steam head
1
, ensure that it has
cooled down completely and that the appliance is no longer connected to
the power supply .
Fabric brush
With clothing made from thick fabrics, such as cotton, the supplied fabric brush
p
works the steam deeper into the fibres .
1) Before you switch on the appliance, attach the fabric brush
p
to the steam
head
1
. To do this, align the lower part of the fabric brush
p
with the lower
part of the steam head
1
(fig . R) . Gently press the top of the fabric brush
p
until it snaps onto the steam head
1
. It will audibly click into place .
2) Switch the appliance on and slowly brush the section of the fabric from top to
bottom . Do not apply a lot of pressure (fig . S) .
3) Switch the appliance off, remove the plug from the power socket and allow the
appliance to cool down completely .
4) Before you detach the fabric brush
p
, disconnect the appliance from the
power supply and allow it to cool down . Press the release latch on the fabric
brush
p
and simultaneously pull it forward (fig . T) .
T
R
S
