■
84
│
GB
│
MT
SDGS 1630 A1
4) Screw the lid tight and turn the water tank
t
around again (fig . J) . Check that
the lid is closed tight enough that no water can escape .
5) Put the water tank
t
back onto the appliance base
z
(fig . K) .
Operation
WARNING – RISK OF INJURY!
►
Never attempt to steam pieces of clothing while they are being worn .
NOTE
►
When using the appliance, make sure to remove all materials that could
block the casters
o
of the garment steamer from the floor (use the appli-
ance on a level, horizontal surface) .
►
Do not use the appliance on very thick rugs or carpets .
1) Loosen the Velcro strap
0
(fig . L) and unroll the power cable
9
fully .
2) Plug the power cable
9
into the mains power socket and switch on the
appliance by pressing the On/Off switch
u
on the front of the appliance
(fig . M) . The operating light
i
flashes green while the appliance is heating
up . When the appliance starts producing steam, the operating light
i
lights
up permanently green .
3) Hang your clothing item on the integrated clothes hanger
3
or another
clothes hanger that you can attach to the clothes hanger mount
5
of the
integrated clothes hanger
3
. Also use the clips for trousers/dresses
4
in the
integrated clothes hanger
3
to steam trousers or dresses (fig . N) .
4) Take hold of the steam head
1
. Make sure you aim the steam openings
away from your body .
5) Start at the top of the piece of clothing and move the steam head
1
down
slowly (fig . O) . Make sure that the steam hose
w
is always vertical .
6) To make your work easier, clamp the bottom of the clothing into the diagonal
bracket
7
before you start steaming (fig . P) . Pull out and rotate the bracket to
move it to the desired position (fig . Q) .
K
