23
GB
7.2 Set iron temperature
NOTE:
The steam iron must be connected to
the stand
7
in order to heat up.
1.
Figure C:
Set the desired temperature
using the temperature controller
17
:
-
MIN
the device is not getting hot
-
÷
temperature: up to
approx. 110 °C
(synthetic materials)
-
÷÷
temperature: up to
approx. 150 °C
(Silk, wool)
-
÷÷÷
temperature: up to
approx. 210 °C
(linen, cotton)
-
MAX
maximum
temperature
2. The temperature control lamp
14
is lit
for as long as the steam iron is heating.
It goes out when the set temperature has
been reached. You can then begin iron-
ing.
7.3 Spray function
Use the spray function in order to dampen
dry items of laundry. This option is available
irrespective of the set temperature. For this
purpose, the water tank
15
must be at least
one quarter full.
• Repeatedly press the spray button
5
.
While doing so, hold the steam iron
horizontally with the tip over the item of
laundry. Ensure that no water sprays
onto the ground.
7.4 Ironing without steam
Sensitive fabrics are ironed at lower temper-
atures and without steam. In order to damp-
en them, the spray function is available.
1. Set the steam flow rate control
3
to
and set the temperature controller
17
to
MIN.
2. Fill the water tank
15
if you wish to use
the spray function.
3. Place the steam iron in the stand
7
.
4. Connect the mains plug
9
with the wall
socket.
5. Set the desired temperature using the
temperature controller
17
. The tempera-
ture control lamp
14
lights up.
6. Start ironing as soon as the ironing tem-
perature has been reached and the tem-
perature control lamp
14
goes out.
7. Finish ironing, set the temperature con-
troller
17
to
MIN
and pull out the
mains plug
9
.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
15
through the filling open-
ing in the water tank (under the lid
2
).
7.5 Ironing with steam
Steam ironing requires a high temperature,
at least the temperature setting for
. In or-
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam flow rate control
3
to
and set the temperature controller
17
to
MIN.
2. Fill the water tank
15
.
3. Place the steam iron in the stand
7
.
4. Connect the mains plug
9
with the wall
socket.
5. Set the temperature controller
17
to the
desired temperature (at least
). The
temperature control lamp
14
lights up.
6. As soon as the ironing temperature has
been reached and the temperature con-
trol lamp
14
goes out, adjust the steam
__317392_Dampfbuegeleisen_B8.book Seite 23 Donnerstag, 20. Juni 2019 1:08 13
