21
GB
4. Items supplied
1 steam iron
1 stand
7
1 measuring beaker
21
1 set of operating instructions
5. Normal or cable-free
ironing
The steam iron can be operated cable-free.
This makes the steam iron a little lighter, and
the cable is no longer in the way during iron-
ing.
As soon as the steam iron is replaced on the
stand
7
, the sole plate is heated up again.
The temperature control lamp
14
lights up
until the set temperature is reached.
Settings on the stand
The switch
11
on the stand
7
allows you to
choose between 2 options:
= cable-free ironing
= ironing with cable and
Storage
Cable-free ironing
Figure A:
lift the steam iron out upwards.
The stand
7
will remain standing without the
steam iron.
Ironing with cable
Figure B:
raise the steam iron. The stand
7
will stay on the steam iron.
NOTE:
If you want to work with a great
many bursts of steam in quick succession,
ironing with the cable is recommended. This
is better because the sole plate
20
may fall
below the set temperature faster than normal
as a result of the many steam bursts.
Storage
Figure B:
the steam iron is locked in place
on the stand
7
.
6. Before using for the
first time
1. Ensure that you have pulled out the
mains plug
9
.
2. The switch
11
is in the position . Re-
move the steam iron from the stand
7
.
3. Open the lid
2
(of the water tank).
4. Pour water into the measuring beaker
21
and half-fill the water tank
15
.
5. Place the steam iron in the stand
7
.
6. To lock the iron, set the switch
11
to the
position
.
7. Insert the mains plug
9
into a wall sock-
et corresponding to the technical data.
8. Set the temperature controller
17
to
MAX.
The temperature control lamp
14
lights
up.
9. When the device has reached the de-
sired temperature (temperature control
lamp
14
goes out), iron an old cotton
cloth in steam mode until the water
tank
15
is empty.
__317392_Dampfbuegeleisen_B8.book Seite 21 Donnerstag, 20. Juni 2019 1:08 13
