Silvercrest SBLL 56 A1, Operating Instructions Manual

Page: 34 / 158

SBLL 56 A1
GB
│
IE
│
31 ■
♦ Ensure that the device is switched off.
If a device is switched on, the operating/
charging LED lights up. Press the
but-
ton for approx. 2 seconds to switch off
a device.
♦ Connect the USB plug on the charger cable
to a USB power supply.
♦ Connect the micro-USB plug of the charging
cable to the charging socket
micro-USB
charging socket (DC 5 V) on the device.
CAUTION
► Use only a mains adapter with an output
voltage of 5 V and an output current of at
least 900 mA or a USB 3.0 port on your
computer to charge the integrated battery.
You can recognise the USB 3.0 port due to
the blue marking.
► USB 2.0 ports do not deliver sufficient power
to charge the integrated battery. Using a
USB 2.0 port can damage the computer.
NOTE
► The operating/charging LED lights up
orange during charging. When the battery is
fully charged, the charging LED turns off.
► Charging takes about 5–6 hours at a charg-
ing current of 900 mA. When the battery
is fully charged, you can play back music
for about 5 hours without lighting, or up to
3 hours with lighting at a medium volume.
The playback time may vary depending on
usage (volume/lighting).
► When the battery is dead, you will hear
beeps every few seconds and the operat-
ing/charging LED flashes orange. When
the battery performance drops too low, the
speaker switches off automatically.