Silvercrest 359393 2007, Operating Instructions Manual

Page: 14 / 134

STGE 2000 A1
GB
│
IE
│ 11 ■
Cleaning
DANGER! ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance!
► Never immerse the heating element
2
in water or other liquids!
WARNING!
► Allow the appliance to cool sufficiently before cleaning it . There is a risk of
burns!
ATTENTION! PROPERTY DAMAGE!
► Do not use a wire brush or other abrasive objects or abrasive or aggres-
sive cleaning agents for cleaning .
1) Clean the heating element
2
with a lightly moistened cloth .
2) Clean the cooking grill
1
, the drip tray
3
and the housing
4
in warm
washing-up water . Rinse all parts after cleaning with plenty of fresh water to
remove all detergent residues .
3) After cleaning, dry all parts thoroughly and reassemble them .
Storage
♦ Store the cleaned appliance in a dry and dust-free location .
Troubleshooting
Fault Cause Remedy
The appliance will
not switch on/does
not react .
The heating element
2
is fitted with a safety
switch . The appliance
can only be started if
this is inserted correctly .
Check that the heating element
2
has
been correctly inserted into the housing
4
.
The plug is not plugged
in .
Insert the plug into a mains power socket .
The socket is not
supplying any power . Check the house fuses or use another
socket .
The appliance is
defective .
Contact the Customer Service department .
If you cannot solve the problem using the steps above, please contact Customer Service (see
section
Service ) .