GB
│
IE
│
NI
│
CY
│
15
■
SDGS 1630 B1
Crease tool
The supplied crease tool
a
helps you to renew or create creases.
1) Before you switch on the appliance, fully attach the hook on the supplied
crease tool
a
into the mount on the bottom of the steam head
1
(fig. T).
2) Press the handle to open the crease tool
a
.
3) Place the clothing between the crease tool
a
and the steam head
1
and let
go of the handle.
4) Switch the appliance on and start at the top of the clothing. Slowly move the
crease tool
a
downward (fig. U).
5) Switch the appliance off, remove the plug from the power socket and allow the
appliance to cool down completely.
6) Detach the crease tool
a
by pulling the hook of the crease tool
a
out of the
mount on the bottom of the steam head
1
.
T
U
Protective cover for sensitive fabrics
You should use the supplied protective cover
s
to press sensitive fabrics, such
as silk or velour.
Ƈ
Before you switch on the appliance, pull the protective cover
s
fully over
the steam head
1
.
Protective glove
Wear the protective glove
d
if, for instance, you are steam-ironing the sleeves of
an item of clothing and inserting your hands into the sleeves to stretch the fabric.
You can hold the steam head
1
close to the fabric without burning your hand.
IB_339706_SDGS1630B1_LB6_IE-NI-CY.indb 15
09.04.2020 12:12:04
