SLB 10 A1
GB
│
MT
│
95
■
AUX IN mode
CAUTION
►
Use the speaker in AUX IN mode only in dry indoor environments
and with the supplied 3.5 mm jack cable
r
.
You can listen to music from a portable audio device connected via the
3.5 mm jack cable
r
.
♦
Make sure that the speaker is switched off.
♦
Open the protective cover
0
.
♦
Use the 3.5 mm jack cable
r
to connect the audio device to the
3.5 mm jack socket
w
on the speaker.
♦
Press and hold the button
1
for about 3 seconds to switch the
speaker on. You will hear a beep and the operating/charging LED
9
lights up blue.
♦
Start playback on the audio device and set the volume to a moderate
level on the audio device.
♦
Then set the desired volume using the button
3
or the button
5
on the speaker.
♦
Press the
button
4
briefly to mute the music playback. Press the
button
4
again briefly to unmute the speaker.
♦
If you are no longer using the speaker in AUX IN mode, disconnect
the 3.5 mm jack cable
r
from the speaker and close the protective
cover
0
.
IB_330701_SLB10A1_LB5.indb 95
30.06.2020 12:16:18
Summary of Contents for 330701 2001
Page 3: ...Quick Start Guide ...
Page 75: ...SLB 10 A1 72 IT MT ...
Page 111: ...SLB 10 A1 108 GB MT ...
Page 147: ...SLB 10 A1 144 DE AT CH ...