GB
│
MT
│
89
■
SEM 1100 B3
Cleaning the milk frother
CAUTIoN – ProPErTy DAmAgE
■
NEVER use abrasive, corrosive or chemical agents to clean the appliance .
These could damage the outer surfaces of the appliance .
1) Place an empty container under the milk frother
0
.
2) Immediately after use, turn the steam control
7
to the “ + “ position and
allow the steam to escape for a few seconds .
3) Turn the steam control
7
off (as far as it will go in the direction “ - “), switch
the appliance off and remove the plug from the mains power socket .
4) Allow the nozzle to cool down .
5) Pull the casing of the milk frother
0
off (Figure 1) and clean it thoroughly in
warm water .
6) Wipe the nozzle under the casing with a damp cloth . If necessary, add a little
mild detergent onto the cloth . After cleaning with detergent, always wipe off
with a cloth moistened with clean water . Ensure that there is no detergent
residue left on the nozzle .
7) Push the casing back onto the nozzle (Figure 1) .
Figure 1
Summary of Contents for 296789
