GB
│
MT
│
83
■
SEM 1100 B3
Heating after a long time of inactivity / during first use
If you have not used it for some time, preheat the appliance as follows:
1) Fill the water tank
9
with tap water .
2) Place either the large
i
or the small espresso sieve
o
in the sieve holder
u
:
–
Make sure that the small indentation on the large
i
or small espresso
sieve
o
is located above the indentation on the sieve holder
u
when
inserted .
–
Then turn the large
i
or small espresso sieve
o
slightly to ensure it
cannot fall out .
NoTE
►
Wait until the espresso sieve
i
o
has cooled down before taking it out!
►
In order to remove the espresso sieves
i
o
from the sieve holder
u
,
turn the inserted espresso sieve
i
o
until the indentation on the espresso
sieve
i
o
is located directly above the indentation on the sieve holder
u
.
You can now remove the espresso sieve
i
o
.
Summary of Contents for 296789
