SilverCrest SSM 600 A1
English - 19
3.
After cleaning, reinsert the sealing ring (B) into the corresponding groove on the plastic base with
cutting blade (C). The sealing ring (B) should hold firmly now.
4.
Screw the plastic base with cutting blade (C) on the glass container (A). To do this, turn it
anticlockwise.
10.2 Storage when not in use
If you no longer need the blender, clean it as described in the “Maintenance / cleaning” section. Then
proceed as follows:
1. Wind the power cable (6) around the cord wrap (9) underneath.
2. Store the blender in a safe, dry place away from dust.
11. Troubleshooting
If your blender does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 21).
Risk of electric shock!
Never try to repair the device yourself.
Problem Possible
cause
Remedy
Blender does not
work
Mains plug not connected
Connect the mains plug to a live mains socket.
Blender jug (4) incorrectly
seated on the motor unit (7)
Place the blender jug (4) onto the motor unit (7)
correctly. See "Attaching the blender jug to the
motor unit" on page 11.
Lid (2) is incorrectly fitted on
the blender jug (4)
Place the lid (2) onto the blender jug (4)
correctly. See "Filling the blender jug" on page
11.
Summary of Contents for 288372
Page 1: ......
Page 2: ......
Page 3: ...English 2 Ελληνικά 23 Deutsch 47 V 1 5 ...
