93
GB
6.5 Trimming a beard
Beard trimmer attachment
14
NOTE:
please note that the cutting lengths will only be
achieved if the switch for cutting length fine tuning
6
is at
position
1
and the hair and beard trimmer
5
is held at a
right angle to the skin surface.
• Comb the beard in the direction that it grows.
• Trim the beard downwards from ear to chin. First trim
one side, then the other.
•
Comb attachment1
Figure C:
adjust the cutting length with the slider ac-
cording to the desired hair length and read off the cut-
ting length using the marking on the side of the comb
attachment
1
(3, 4, 5, 6 mm). Now, shorten your
beard step-by-step.
• Use the beard trimmer attachment
14
without a comb
attachment
1
, to cut the beard very short or to cut a
moustache and hairline.
• Using the switch for cutting length fine tuning
6
the cut-
ting length can be slightly varied with three levels
(
1
: 0.8 mm /
2
: 1.3 mm /
3
: 1.8 mm).
• To trim your moustache, first comb it straight down-
wards. Then use either the beard trimmer attach-
ment
14
or the precision trimmer attachment
4
. Start
at the centre above the mouth and trim first one side,
then the other.
BB*5$B%ERRN6HLWH0LWWZRFK1RYHPEHU
