Silvercrest 273264, Operating Instructions Manual

Page: 9 / 100

6
SSM 550 D1
GB
IE
Unpacking
■ Remove all packaging materials or protective films from the appliance. Retain
the packaging, so that you can store the appliance safely or send it by post,
e.g. if it needs to be repaired.
■ Before using the appliance, check that it is free of damage; check also that
the power cable and plug as well as all accessories and appliance parts are
undamaged.
■ Clean all components carefully before using the appliance for the first time
(see “Cleaning”).
Setting up
Once all components have been cleaned as described in the section “Cleaning”:
■ Position the appliance so that, ...
–
that the mains cable passes through the recess at the rear of the
appliance,
–
the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
–
that it is stable and not liable to slip, and so that the sucker feet can
attach firmly and the appliance cannot tip over due to vibration,
–
that the mains cable is not in the working area and thus does not
present a risk of being inadvertently snagged and tipping the appliance
over.
Operation
WARNING!
► The motor switches itself off as soon as the blender is removed from the
motor block . It is thus possible to overlook the fact that the appliance
is still switched on. The motor will then start unexpectedly as soon as the
blender
is replaced on it:
Therefore:
–
Do not insert the power plug into the wall socket until the blender is
filled and mounted with its lid fitted and closed.
–
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
–
Before removing the blender , switch the appliance off, remove the
power plug and wait for the motor to stop turning.