14
SSM 550 D1
GB
IE
WARNING! RISK OF INJURY!
►
Take care with the cutting blades
. They are very sharp. Risk of injury!
3) Clean both parts thoroughly in a mild soapy solution or in a dishwasher.
4) Refit the plastic element
of the blender
onto the glass element
.
Ensure that the sealing ring
is correctly fitted.
Cleaning the motor block
1) Use a dry or no more than slightly moistened cloth to clean the plastic
surfaces.
2) When cleaning, always check that the contact switch in the fitting for the
blender
is not blocked by soiling residues. If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services. Do not use any hard objects, these could damage the contact
switch.
3) Remove any possible residues on the underside of the motor block
with a
dry cloth or a stiff-bristled brush only. Ensure that nothing can get in through
the ventilation openings of the appliance.
After cleaning
Allow all parts to dry well before reassembling and reusing the liquidiser.
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter “Cleaning”).
2) Wrap the power cable
around the cable retainer
on the base of the
motor block
.
3) Store the blender in a cool and dry location.
Summary of Contents for 273264
Page 3: ......
