13
SSM 550 D1
GB
IE
■
If you clean the blender directly after use, you can often achieve a satisfacto-
ry and hygienic level of cleaning by doing the following:
Fill the blender
with 750 ml of water and add a few drops of mild
detergent. Close the lid
and fit the blender
onto the motor block
.
Insert the plug into a mains power socket and activate the Ice Crush/Clean
operation a few times, so that the cutting blades
churn through the water
at full speed.
Afterwards, rinse out the blender
with lots of clean water to ensure that
all detergent residues have been removed.
If this does not remove the soiling, you can separate the lower plastic part
of the blender
(with the cutting blades
) from the the glass part of the
blender
:
Glass element
Sealing ring
Cutting blade
Plastic element
1) Remove the blender
from the motor block
.
2) Turn the plastic element
of the blender
anticlockwise, so that it can be
separated from the glass element
of the blender
.
Summary of Contents for 273264
Page 3: ......
