SILLA PRISM SOLAR RFID, Instructions For Installation, Use And Maintenance Manual

Page: 33 / 52

CONNECTION TO INTERNET
In order to receive updates and to be able to use Prism remotely, Prism must be
connected to the internet.
Once connected to the internet, the Prism Wi-Fi can also be used as an internet
access point.
Connection to a wired network (Ethernet)
By connecting the Prism via Ethernet to a DHCP-enabled network, you will immediately
be able to access the Internet and no further network configuration is required. The
second page of the configuration wizard shows the IP address assigned to Prism by
the router:
Note: we recommend that you assign Prism a fixed IP (from your router or Prism
settings) so that you can reach the interface more comfortably over the local network,
using the new IP address instead of the default 192.168.8.1.
Prism SOLAR rel. 2.2.2 - 27