Silk'n GoBrush Mist, User Manual

Page: 16 / 230

EN
15
• Never touch the heating plates and the
upper part of the steam brush straightener
during use.
• Always pull the steam brush straightener
through the hair. Never stay at one position
for too long. You may singe your hair!
1. Prepare the hair as described in the chapter “Before
straightening”.
2. If you intend to use the steam feature, fill the water tank as
described in the chapter “Filling the water tank”.
3. Switch on the steam brush straightener and select a desired
operating temperature (see chapter “Switching on/off and
selecting a temperature”).
4. If the heating plates
1
are closed, slide the plate lock switch
3
to the unlock position ( ) to open them.
5. If you intend to use the steam feature, press the steam button
11
once. The steam icon ( ) will show on the display
10
.
6. Take a hair section and pull it taut by holding its end tightly
between your index and middle finger of the hand that is NOT
holding the steam brush straightener.
7. Clamp the hair section near the root by pressing the heating
plates
1
together.
If the steam feature is used, steam will be emitted from the
steam nozzle
4
while the heating plates are pressed together.
The steam icon ( ) flashes while steam is emitted. A full
water tank (approx. 12 ml) provides about 15 minutes of
steam styling.
8. Glide the steam brush straightener downwards from the root
to the tip through the heating plates (see Fig. C ).
Control the speed for better results in a single glide. Next are
recommendations.