3.6.2 Qwiic Connector
The xG24 Dev Kit features a Qwiic connector compatible with Qwiic Connect System hardware. The Qwiic connector provides an easy
way to expand the functionality of the xG24 Dev Kit with sensors, LCDs, and other peripherals over the I
2
C interface. The Qwiic con-
nector is a 4-pin polarized JST connector, which ensures the cable is inserted the right way.
Qwiic Connect System hardware is daisy chain-able as long as each I
2
C device in the chain has a unique I
2
C address.
Note:
The Qwiic I
2
C lines are shared with the on-board I
2
C sensors, and are also exposed on the breakout pads.
The table below gives an overview of the Qwiic connections to the EFR32MG24.
Table 3.3. Qwiic Connector Pinout
Qwiic Pin
Connection
Shared Feature
Ground
GND
3.3V
VMCU
SDA
PC05
Breakout pads, I
2
C sensors
SCL
PC04
Breakout pads, I
2
C sensors
3.6.3 Mini Simplicity Connector
The Mini Simplicity connector is a 10-pin 1.27 mm pitch connector that allows the use of an external debugger such as the one found
on one of the Silicon Labs Wireless mainboards. See section
for more details. The pinout of the connector on
the board is described in the table below with the names being referenced from the EFR32MG24.
Table 3.4. Mini Simplicity Connector Pin Descriptions
Pin number
Function
Connection
Description
1
AEM
VMCU
Target voltage on the debugged application. May be supplied and
monitored by the AEM on an external debugger.
2
GND
GND
Ground.
3
RST
RESET
EFR32MG24 reset.
4
VCOM_RX
PA06
Virtual COM Rx
5
VCOM_TX
PA05
Virtual COM Tx
6
SWO
PA03
Serial Wire Output
7
SWDIO
PA02
Serial Wire Data
8
SWCLK
PA01
Serial Wire Clock
9
PTI_FRAME
PC07
Packet Trace Frame
10
PTI_DATA
PC06
Packet Trace Data
3.6.4 Debug USB Micro-B Connector
The debug USB port can be used for uploading code, debugging, and as a Virtual COM port. More information is available in section
.
UG524: xG24 Dev Kit User's Guide
Hardware
silabs.com
| Building a more connected world.
Rev. 0.1 | 20
