Rev. 1.1 5/15
Copyright © 2015 by Silicon Labs
Si5345-EVB
S i 5 3 4 5 - E V B
S i 5 3 4 5 E
V A L U A T I O N
B
O A R D
U
S E R
’
S
G
U I D E
Description
The Si5345-EVB is used for evaluating the Si5345
Any-Frequency, Any-Output, Jitter-Attenuating Clock
Multiplier. The Si5345 combines 4th generation DSPLL
and Multisynth
technologies to enable any-frequency
clock generation for applications that required the
highest level of jitter performance. The Si5345-EVB has
4 independent input clocks and 10 independent output
clocks. The Si5345-EVB can be controlled and
configured using the Clock Builder Pro
(CB Pro
)
software tool.
EVB Features
Powered from USB port or external power supply.
Onboard 48 MHz XTAL or Reference SMA Inputs
allow holdover mode of operation on the Si5345.
CBPro
GUI programmable V
DD
supply allows
device to operate from 3.3, 2.5, or 1.8 V.
CBPro GUI programmable V
DDO
supplies allow each
of the 10 outputs to have its own power supply
voltage selectable from 3.3, 2.5, or 1.8 V.
CBPro GUI-controlled voltage, current, and power
measurements of V
DD
and all V
DDO
supplies.
Status LEDs for power supplies and control/status
signals of Si5345.
SMA connectors for input clocks, output clocks, and
optional external timing reference clock.
Figure 1. Si5345 Evaluation Board
