Silicon Laboratories Si446 Series, Manual

Page: 14 / 112

A N 6 2 5
14 Rev. 0.1
3.2.5. GET_PROPERTY
 Summary: Retrieve a property's value.
 Purpose:

Retrieve a property's value; The value will either be the default or the value set with SET_PROPERTY.
 Command Stream
 Reply Stream
 Parameters:

GROUP[7:0] - Selects the group of the properties to retrieve.

NUM_PROPS[7:0] - Number of properties to retrieve starting at START_PROP.
Range: 1 to 16

START_PROP[7:0] - Selects the first property index to retrieve. The available properties are determined by the part
number and the POWER_UP:FUNC selection.
GET_PROPERTY Command 7 6 5 4 3 2 1 0
CMD 0x12
GROUP GROUP[7:0]
NUM_PROPS NUM_PROPS[7:0]
START_PROP START_PROP[7:0]
GET_PROPERTY Reply 7 6 5 4 3 2 1 0
CMD_COMPLETE CTS[7:0]
DATA0 DATA0[7:0]
DATA1 DATA1[7:0]
DATA2 DATA2[7:0]
DATA3 DATA3[7:0]
DATA4 DATA4[7:0]
DATA5 DATA5[7:0]
DATA6 DATA6[7:0]
DATA7 DATA7[7:0]
DATA8 DATA8[7:0]
DATA9 DATA9[7:0]
DATA10 DATA10[7:0]
DATA11 DATA11[7:0]
DATA12 DATA12[7:0]
DATA13 DATA13[7:0]
DATA14 DATA14[7:0]
DATA15 DATA15[7:0]