1. Kit Description and Powering Up the Si3474 EVB
The Si3474 EVB consists of a four-layer daughter card, a four-layer baseboard and an RJ45 connector board.
The daughter card includes the Si3474, FETs and the J3 jumper. The purpose of the J3 jumper is to configure the I
2
C Address for
which the Si3474 responds to. Note that each Si3474 device responds to two I
2
C Addresses because there are two quads in every
Si3474 device.
Si347xy-MB
Baseboard
Si3474-DC
Daughter Card
POE_BT_CB
RJ45 Connector Board
Isolation
Boundary
Figure 1.1. Si3474-EVB Baseboard, Daughter Card, and RJ45 Connector Board
Figure 1.2. Si3474-EVB Daughter Card
UG425: Si3474 EVB User's Guide
Kit Description and Powering Up the Si3474 EVB
silabs.com
| Building a more connected world.
Rev. 0.1 | 3
