manualshive.com logo in svg

Silicon Graphics ICE XA, Hardware User'S Manual, Page: 62 / 96

Share
Download
Silicon Graphics ICE XA Hardware User'S Manual Download Page 62

44

007-6399-002

3: System Overview

Note:  

In an E-Cell compute rack system (viewed from the front), the compute rack number on 

the left is always (001). 

The number of the first blade enclosure will always be zero (0). These numbers are used to identify 
components starting with the rack, including the individual blade enclosures and their internal 
compute-node blades. Note that these single-digit ID numbers are incorporated into the host 
names of the rack leader controller (RLC) as well as the compute blades that reside in that rack.

Note that an air cooled D-rack is used to support administrative and rack leader server nodes, 
service specific nodes, optional mass storage enclosures and potentially other options. 

Optional System Components

Availability of optional components for the SGI ICE XA series of systems may vary based on new 
product introductions or end-of-life components. Some options are listed in this manual, others 
may be introduced after this document goes to production status. Check with your SGI sales or 
support representative for the most current information on available product options not discussed 
in this manual. 

Summary of Contents for ICE XA

































































































Reviews:

No comments