COPAN 400T/TX - Service Manual
6-5
6.2.8
Powering On
1. At the PSM-KVM Service GUI, for each shelf connected to the server being serviced, do a
Start Shelf.
2. At the PSM-KVM, reconnect the browser to the BMC of the server.
3. Power on the server using the BMC Power On command.
6.2.9
Installing the OS and VTL Application Software
1. Install the OS and VTL software on the replacement Application Processor. Refer to
Chapter 4: OS and VTL Software Installation
.
2. Once the VTL application is up, reconnect the VTL GUI and verify all resources are
available.