3-18
COPAN 400T/TX - Service Manual
3.7.2
Connect the other ends of the AP0 cables to the I/O Panel
Connect the appropriate cables to the I/O Panel using the table titled, Fibre Channel HBAs in
Application Processor on page 2-5.
1. For the Host connections, run the appropriate fibre cables to the
inside
of the left side of the
I/O Panel.
2. For
Shelf
connections,
run
the
appropriate
fibre
cables
to
the
outside
of the right side of the
I/O Panel, via the pass through openings in the panel.
S
HELF
C
ONNECTIONS GOING TO
O
UTSIDE OF RIGHT SIDE OF
I/O P
ANEL
3. Once all cabling is complete, push the application processor into the cabinet and reconnect
the AP0 power cables to the power bay.