3-16
COPAN 400T/TX - Service Manual
3.7 Step 6 - Connecting the Cables for AP0
Refer to DOC00482 for labeling instructions.
3.7.1
Connect all cables to the back of the AP0
1. Unplug the AP0 and AP1 power cables from the power bay to prevent the server from
booting up once the power cord is connected to the server.
2. Connect the AP0 cables (fibre, ethernet, etc.) to the back of the Application Processor. Refer
to DOC00482 for labeling instructions.
3. Pull the cables into the cable management arm, wrapping the velcro around the cables to
hold them in place.
C
ABLE
M
ANAGEMENT
A
RM WITH
C
ABLING AND
V
ELCRO