manualshive.com logo in svg

Silicon Graphics Altix XE1300, Quick Reference Manual

Share
Download
Silicon Graphics Altix XE1300 Quick Reference Manual Download Page 38

30

 007-4979-004

1: SGI Altix XE1300 Cluster Quick-reference

Contacting the SGI Customer Service Center

To contact the SGI Customer Service Center, call 1-800-800-4SGI, or visit: 
http://www.sgi.com/support/customerservice.html

 

From outside the United States contact your local SGI sales office.

To reach SGI for other purposes, use the following contact information:

SGI Corporate Office

1140 E. Arques Avenue

Sunnyvale, CA 94085

(650) 960-1980

http://www.sgi.com

North A1 800.800.7441

Latin A55 11.5185.2860

44 118.912.7500

Japan +81 3.5488.1811

Asia P1 650.933.3000

Cluster Administration Training from SGI

SGI offers customer training classes covering all current systems, including clusters. If you have 
a maintenance agreement in place with SGI, contact SGI Customer Education at 1-800-361-2621 
for information on the time, location and cost of the applicable training course you are interested 
in. Or, go to the following URL site for more education information:

 

http://www.sgi.com/support/custeducation/

Customers with support contracts can also obtain information from:

 

https://support.sgi.com/login

 

Summary of Contents for Altix XE1300



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands