Silicon Graphics 230, User Manual

Page: 117 / 148

System Security
007-4263-001 101
Figure 4-13 Exit Setup Screen
6. Choose Yes to save your settings and exit the Setup Utility. Your password will be
saved to CMOS.
The next time you want to enter the BIOS utility, you must key in your Supervisor
password.
Removing a Password
To remove your Supervisor Password:
1. Disable the
Supervisor Password
parameter in the
System Security
menu
by pressing the left or right arrow key to select None.
2. Press the
Esc
key to return to the
System Security
menu and then press the
Esc
key again to exit Setup. The
Exit Setup
screen appears:
Figure 4-14 Exit Setup Screen
3. Choose Yes to save your settings and exit Setup Utility. Your previous password will
be removed from CMOS.