Silicon Graphics 230, User Manual

Page: 116 / 148

100 007-4263-001
4: Setup Utility
Setting and Changing a Password
To set or change a password:
1. Enable the
Supervisor Password
parameter in the
System Security
menu
by pressing the left or right arrow keys. The
Supervisor Password
window
appears:
Figure 4-12 Supervisor Password Screen
2. Type a password in the Enter Password field. The password may consist of up to
seven characters.
3. Press the Enter key. Retype your password in the Enter Password Again field to
verify your first entry.
4. Highlight
Set or Change Password
and press the
Enter
key.
5. Press the
Esc
key to return to the System Security menu and then press the
Esc
key
again to exit Setup. The Exit Setup screen appears: