Silicon CPV Ltd
Akhter House, Perry Road, Harlow, Essex, CM18 7PN, UK
Tel +44 (0) 1279 821200 Email [email protected]
Page 8 of 24
Installation Instructions for Kamr
–
Part 1
The ‘ON/OFF’ switch for the kamr Street Light is located on the underside
of the light, the small silver button of the switch indicates this and will be
situated adjacent to and in line with the antenna. (see figure 2).
Mode selection
1.
When the button of the switch is in the position where the button if
the switch is below the switch bezel, the Kamr Street Light is in the
‘OFF’
state.
2.
When the button of the switch is in the position where the the button
of the switch is level with the switch bezel, the Kamr Street Light is
the
‘ON’
state.
Figure 2
Antenna
On/off switch
Vent holes
