.................................. SX-ULPGN-EVK
The following items should be present in the Evaluation Kit Box:
SX-ULPGN-EVK radio card.
USB-A to UART adapter cable (Communications & Power)
This Quick Start Guide
If any of the above items are missing please contact Silex Technology America
technical support immediately:
Tel (US):
866.765.8761
Tel (International):
+1.801.748.1199
e
.
mail:
1
Connect USB-A to UART adapter cable to headers (J1 and
J4) on the EVK board:
2
Connect the USB to UART cable to your computer. This will
power up the EVK board.
3
Open a terminal emulation application e.g. teraterm, PuTTy,
etc. (Serial settings: 115200N81)
4
Open a session associated with the COM port assigned to
the EVK.
5
The terminal session will display a
shell>
prompt. You now
have access to the demo platform console, configuration and
evaluation of the system is covered in the next section.
140-00211-100 RevA
Silex Technology America, Inc.
Full documentation on the SX-ULPGN can be found on the Silex and Arrow
Websites.
10
1
J1
W
H
IT
E
Rx
B
LA
C
K
G
N
D
G
R
E
E
N
Tx
J1
J4
microUSB
SX-ULPGN
RED
6
1
J4
5
V
D
C
