Silex technology MNS-300EM, Command Manual

Page: 68 / 134

56
MNS-300EM Command Manual
6-1-13. SET PORT S1 STOP
Sets the stop bit of the serial port.
SET PORT S1 STOP [1 | 2]
Enter 1 or 2 as the stop bit.
The factory default value is
1 .
6-1-12. SH PORT S1 STAtus
Shows the serial port status.
SH PORT S1 STAtus
Sample output:
Local> SH PORT S1 STAtus
Port S1 status = On-line
Serial Device
3 bytes transmitted, 0 bytes received
0 framing errors, 0 parity errors, 0 overrun errors, 0 buffer overruns, 0 breaks