Silex technology MNS-300EM, Command Manual

Page: 17 / 134

2. How to Access Command Console
5
2.
How to Access Command Console
MNS-300EM settings can be updated and managed using the command console.
Some function can be configured by the command console only.
Use one of the following ways to access the command console:
• MNS-300EM's serial data port
• Configuration console port
• Linux console port
In addition to the above, the Web console function can be used from MNS-300EM's Web
page. Whichever method is used to access the command console, the setting method is
the same unless otherwise noted.
Capital letters in the following command explanations are minimum essential command
tokens. These characters must be entered for commands to be recognized and cannot be
omitted.
• The following commands can be substituted for each other:
SEt, DEFine, CHange Updating a setting value
DEl, CLear, PUrge Deleting a setting value
• Characters except for command tokens can be omitted.
• The following two commands have the same meaning:
- SET NW PEAPMSchap ENable
- SET NW PEAPMS EN
Note