User Manual
Model: SS-RT
Brand: Silent Safaris
FCC ID: S7FSS-RT
Connect your media devices to the transmitter by using the cable with 3.5mm audio
plug. And sounds will send to the transmitter through the audio cable. Then
press the
key of transmitter at a short time for switching channel, keep your wireless headset
and FM transmitter at the same frequency. The wireless headset will receive the music.
You can enjoy your digital music with all sound and convenience.
Specification:
Operation Voltage
：
3.7V
Operation Current
：
42mA
Transmitting Power
：
8dBm
Operation Frequency
：
915, 917MHZ
Modulation
：
FM
Charge Voltage
：
5.0V
Charge Voltage
：
200mA
Charge Time
：
1-2 hours/(200mA)
I. Press Key
：
①
Power on by press the Power SW for a second, Power off by press key for a second
②
After startup, press the key at a short time for switching channel , and the device acquiesce in 1
channel (915MHz) with green indicator.
③
Press the key at a short time for changing to 2 channel
（
917MHz
）
with red indicator
④
If there is no input signal
，
after 5 seconds the device will auto power off
，
you should power on
the device own.
⑤
Only the input signal larger than 60mVp-p, the transmitter can identify the signal. Otherwise the
recognition is no signal.
II. Charge
The USB plug is used for charging
①
When no starting charging, red light flashing.
②
After startup charging, the light is blinking; When the battery is full ,it will return to its original state
of work instructions
