SILENT KNIGHT IFP-2000, Installation And Operation Manual, Page: 141 / 238

Programming
151430 9-5
9.2.4 View Module List
To view a list of all modules, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
Display reads:
Initializing
Please wait . . .
3. Press to enter module menu.
4. Press 4 to view list. Use to scroll though list.
9.3 Zone
Through the zone option in Panel Programming you can edit, add, delete, and view zone
points. Selections made here affect all detectors and switches in the zone. Up to 999 zones can
be used in each panel.
9.3.1 Edit Zone
Features that can be edited through the edit zone option are, edit zone name, zone properties
(which includes, zone type, and detector sensitivity), and zone accessory options.
To edit a zone, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
Display reads:
Initializing
Please wait . . .
3. Press to enter zone menu.
4. Press to edit a zone.
5. Enter the zone number, then press .
9.3.1.1 Edit Zone Name
6. Press to edit the selected zone name.
7
1
7
2
1
1